home *** CD-ROM | disk | FTP | other *** search
-
- #11 "YELLOW BOX PLANS"
- By CAPTAIN HOOK
- On Feb 3, 1986 5:47
-
- Now to begin with you need the
- following:
-
-
- 1) A telephone line showing up in the
- wall.You can find the opening
- behind all those round plates
- AT&T puts in when they disconnect
- or begin to put a phone in.
- 2) 1 Modular jack
-
- 3) 1 Screwdriver
-
- 4) 1 Human being who knows what
- the hell their doing!!!!
- (in other words an IQ of 3 or so
- will do)
-
- PREPARATION:
-
- 1) open the plate to expose the wire
- running through the wall or you ca
- n remove an old jack to find the
- wire.(Note: it must be a complete
- wire not an end as is used for the
- setup of a normal phone)
- 2) Cut the wire in half.Now check your
- other phones (Note: i had 2 other
- phones so one works the other wont
- )
- 3) Now splice up the 2 ends of the
- wire you just cut.You will find
- 4 or 6 color coded wires on each
- end.
- 4) Splice up each smaller wire so as
- the metal is exposed.
- 5) Next now this is the hard part
- look at the jack at match the color
- s(Note:if you cant do this:
- a) get a very sharp razor blade
- b) now put to the wrists and slice
- that.
- c) wait about an hour and your dead
- KINDA FINAL ISNT IT!!!!!
- 6) each screw will now have 2 of each
- colore wire on it.
- 7) Plug in the phone.
-
- YOUR DONE!!!!!!!!!!!!!!!!!!!!!
- NOTE:THIS PROCESS IS IRREVERSABLE!!!!
-
-
-
- *>
-